IBUKI E150 Magnet Horn, Vessel Length 20-75m

HORN-IBU-E2B2W-

*IBUKI E150 HORN, WHITE, 24VDC C/W: TOGGLE SWITCH

- 01 PCE OSCILLATOR UNIT

- WITHOUT HEATER

LLYODS APPROVED FOR VESSELS FROM 20M TO LESS THAN 75M LENGTH

ORIGIN: JAPAN

For the vessel length 20-75m

E150 Magnet horn with heater

Lloyd type approval

E150 magnet horn is electrically driven,and equipped the electro-magnet & Oscillator unit to be sounded.

Frequency: 320Hz

Sound pressure level (dB/1m): >130dB

Power supply: DC24V

AC220V(Heater)

IBUKI E150 Magnet horn is compact and lightweight body driven by electric power source. Tone is generated via electro-magnet to diaphragm vibration. The horn unit and oscillator are one unit. The working voltage is DC24V as standard, AC100V and 220V are available as options with a converter.

Heater is available for use in cold areas.

IMPA CODE: 370105, 370106, 370107, 370185, 370186, 370187, 370188, 370189, 370190, 370191, 370192, 370193, 370195, 370196, 370197, 370198, 370199

NKK Approved

HK Approved

Certificate Of Type Approval (MCA)

Certificate No: LR21182707MC

This certificate is issued under

the authority given in

Merchant Shipping Notice No

MSN 1874 (M+F) Annex 2 as

amended to date.

71 Fenchurch Street, London, EC3M 4BS, United

Kingdom

TA17 1.0.0

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred

to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense

caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant

Lloyd's Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and

conditions set out in that contract.

Lijo Thomas

Senior Surveyor to Lloyd's Register EMEA

A member of the Lloyd's Register group

This is to certify that LLOYD'S REGISTER, specified as a "person" under the terms of The Merchant Shipping (Marine

Equipment) Regulations 2016 (SI2016 No. 1025), did undertake the relevant type approval procedures of the

equipment identified below which was found to be in compliance with the International Regulations for preventing

Collisions at Sea, 1972 (COLREG 72), as amended, requirements subject to any conditions in the Design Appraisal

Document hereto.

Manufacturer Ibuki Kogyo Co., Ltd.

Address 7-28 Takadono 1-Chome, Asahi-Ku, Osaka, 535-0031, Japan

Type Sound Signal Appliances

Description Electrically controlled magnet horn – Type: “E150” or when fitted with heater –

Type: “E150H”

Trade Name E150H

Specified Standard The Convention on the International Regulations for Preventing Collisions at

Sea 1972 (COLREGs), Annex III/1 1(a) to (d) inclusive

EN 60945 (2002)

This certificate is not valid for equipment, the design or manufacture of which has been varied or modified from the

specimen tested. The manufacturer should notify Lloyd's Register EMEA of any modification or changes to the

equipment in order to obtain a valid Certificate.

The attached Design Appraisal Document forms part of this certificate.

This certificate remains valid up to the expiry date, unless cancelled or revoked, or until such date where it is

superseded by the requirements of the Marine Equipment Directive, whichever is sooner, provided the conditions in

the attached schedule are complied with and the equipment remains satisfactory in service.