SECUMAR 13781 PX150, SINGLE 150N INFLATABLE LIFEJACKET

  • Product Code: PX150
  • Product SKU:
  • Availability: Out Of Stock

Discontinued, replace with:

SECUMAR, MYSTIC, 15670, SINGLE 150N, INFLATABLE LIFEJACKET


SECUMAR, 13781 PX150, SINGLE 150N INFLATABLE LIFEJACKET

Universal application, for inland waterways, in-shore and off-shore waters, shipyards.

This life jackets is equipped with an integrated safety harness.

  • Buoyancy: approx. 165 N
  • Colour: red
  • Weight: approx. 0.85 kg
  • CO2-cartridge: 32 g CO2-Cartridge (P/N 927)
  • Approvals: DIN EN ISO 12402-3 DIN EN ISO 12401
  • Size: > 50 kg body weight 70 to 135 cm chest measurement

Protective Stole

  • integrated safety harness (acc. DIN EN ISO 12401)
  • lifting becket (3.2 kN)
  • Material: Nylon fabric
  • Colour: red
  • closed by: Velcro fastener
  • Buckle: stainless steel buckle

Buoyancy Chamber

  • standard buoyancy chamber
  • additional oral inflation valve
  • Material: polyurethane-coated polyamide fabric
  • Colour: yellow
  • Retroreflecting tape: 300 cm² (3M®)

Temperature range:

  • storage: -54° C to +70° C
  • operation: -10° C to +70° C

 


NOAH is a ISO Certified (Lifejacket) Servicing Centre

T: (+65) 6266-0788 | E: SERVICE2@NOAH.COM.SG | W: WWW.NOAH.COM.SG


SERVICING INFLATABLE LIFE JACKETS


SERVICING

Lifejackets need a service too

Where the safety of peoples’ lives is concerned, regular inspection of the equipment concerned is absolutely essential. This also applies to lifejackets. Natural aging process can influence the properties of the material and also the functioning of the automatic inflator system is not immune to possible damage (among other things operational errors). In other words: the life of a lifejacket must be limited. The corresponding time frame has been set at 10 years, a decision borne authoritatively by the members of the German Association for Sea Rescue Equipment (FSR), and which complies with the law of safety and product liability.

A prerequisite for this lifetime is an inspection of the lifejacket by an authorized servicing station or the manufacturer at least every two years.

Safety as a visible sign

Regular inspection is documented by the FSR-Service-Sticker, which, similarly to a car’s MOT sticker, signalizes the month and year of the next service due.

Servicing 

The regular system check by the expert comprises testing the buoyancy chamber for air leaks as well as a scrutinizing check of the fully automatic inflation system. Moreover, within the framework of this SERVICE we can offer:

  • Repair
    Removal of any defects discovered in the course of the inspection as well as replacement of the complete protective cover or buoyancy chamber.
  • Conversion / Optional extras
    Converting from manual release to automatic inflation, adding a spray hood, installation of an emergency light and further signalling accessories.

Receipt of the new FSR-Service-Sticker confirms, so to speak, the correct functioning of the rescue equipment and always reminds you of the Date of the next inspection, the sticker being clearly visible from the outside.

MPA guidelines for safe transfer of persons between vessels at anchorages recommends the use of a working SOLAS type life jacket or a lifejacket meeting ISO 12402 Personal Floatation Devices performance level 100 or higher.


#life preserver jacket

330141 LIFE JACKET INFLATABLE TJ-5

膨胀式救生衣带哨

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha