SECUMAR 14256 GOLF TWIN 275N LIFEJACKET/LIVEVEST MANUAL/AUTO W/LIGHT, SOLAS
solas approved inflatable life jacket
inflatable lifejacket 275n
Inflatable life vest
STANDARd EQUIPMENT AND CHARACTERISTICS
| |
|---|
| Performance Class (ISO 12402) | 275 N |
| Type of buoyancy | Inflatable |
| Method of Inflator | Automatic inflator 3001s and manual inflator 301SM |
| Buoyancy | 280 N |
| CO₂-Cartridge | 60 g (11896) |
| Buoyancy chamber type | Bright yellow buoyancy chamber, twin-chamber-membrane-technology, overpressure valve |
| Standard equipment | Whistle, oral valve |
| Closure | Front click buckle |
| Crutch strap | Optional |
| Spray Hood | Optional |
| Emergency light | Yes |
| Inspection window | No |
| Lifting becket | Yes |
| Size / Body weight | over 43 kg |
| Buoyancy chamber | Classic |
| Type of clothing | Heavy weather clothing |
| Buddy Line | Yes |
| Approval | CE, SOLAS |
| Reflexstreifen | Yes |
| Back section | divisible back strap |
| BUOYANCY CLASS | BUOYANCY CHAMBER | APPROVALS |
|---|
 |  | |
Universal application, for off-shore waters. With the patented SECUMAR CLICK-buckle the donning and doffing of the lifejacket is very easy, it is donned like a normal jacket.
The lifejacket/lifevest with Harness (P/N 14164) is equipped with an integrated safety harness.
The twin chambers offer a 100% redundancy in case of a defect in the standard upper buoyancy chamber. The lower chamber can be activated if necessary. The volume of the lower chamber has the same buoyancy as the upper chamber. It is not necessary to inflate extra air via the oral inflation valve.
APPROVALS:
- SOLAS 74/78 [IMO Res. MSC.81(70), MSC.200(80),
MSC.207(81), MSC.226(82)]
- DIN EN ISO 12402-2
- DIN EN ISO 12401 (only Harness)
|
Buoyancy Class (CE)
|
275 N
|
|
Type of buoyancy/ Method of Inflator
|
Inflatable / Automatic Inflator 3001S and Manual Inflator SECU 301SM
|
|
Buoyancy/ CO2-cartridge size
|
280 N / 60g
|
|
Size/ body weight Buoyancy
|
from 50 kg body weight
|
|
Buoyancy chamber system
|
Signal-yellow double buoyancy chamber, retroreflective tape, zip fastened, lifting becket, SECUMAR Click-Buckle
|
|
Standard equipment
|
Distress light SECULUX CFX-II, buddyline, two-tone-whistle, integral safety harness (acc. to DIN EN ISO 12401; only P/N 14164)
|
|
Colour
|
Navyblue, Orange (=SPR)
|
|
Harness
|
Optional (P/N 14164)
|
|
Closure
|
Click front buckle
|
|
Emergency light
|
Yes, CFX-II
|
|
Particularly suitable for / Operational area
|
Ocean shipping (SOLAS)
|
Lifejackets need a service too
Where the safety of peoples’ lives is concerned, regular inspection of the equipment concerned is absolutely essential. This also applies to lifejackets. Natural aging process can influence the properties of the material and also the functioning of the automatic inflator system is not immune to possible damage (among other things operational errors). In other words: the life of a lifejacket must be limited. The corresponding time frame has been set at 10 years, a decision borne authoritatively by the members of the German Association for Sea Rescue Equipment (FSR), and which complies with the law of safety and product liability.
A prerequisite for this lifetime is an inspection of the lifejacket by an authorized servicing station or the manufacturer at least every two years.
Safety as a visible sign
Regular inspection is documented by the FSR-Service-Sticker, which, similarly to a car’s MOT sticker, signalizes the month and year of the next service due.
Servicing
The regular system check by the expert comprises testing the buoyancy chamber for air leaks as well as a scrutinizing check of the fully automatic inflation system. Moreover, within the framework of this SERVICE we can offer:
- Repair
Removal of any defects discovered in the course of the inspection as well as replacement of the complete protective cover or buoyancy chamber. - Conversion / Optional extras
Converting from manual release to automatic inflation, adding a spray hood, installation of an emergency light and further signalling accessories.
Receipt of the new FSR-Service-Sticker confirms, so to speak, the correct functioning of the rescue equipment and always reminds you of the Date of the next inspection, the sticker being clearly visible from the outside.
WSH Alert Accident Notification, 26 February 2021: Worker fell off pilot ladder into sea
|
The industry is reminded to conduct a comprehensive Risk Assessment for all work activities related to vessel embarkation and disembarkation. Precautions must be taken to prevent workers from falling into water. Where possible, always select a safer method (e.g. use of vessel gangways) for embarkation or disembarkation. If pilot ladders must be used, ensure workers are physically fit for the task and sufficiently confident before allowing them to proceed. Safe Work Procedures must be established to guide workers on the safe use of pilot ladders. Employers of workers exposed to the risk of falling into water must provide suitable life vest to keep the workers afloat in the event they fall into the water. Workers should be trained on the importance and correct manner of donning the life vest. Instruct workers not to attempt embarking or disembarking a vessel when conditions are not favourable (e.g. heavy rain, strong winds and/or choppy waters). If conditions are good, then embarking/disembarking may proceed only when the passenger launch is in position.
•Life jackets: For safe boarding of vessels, the Maritime and Port Authority of Singapore recommends the use of SOLAS type-approved life jacket or a life jacket meeting ISO 12402 Personal Flotation Devices with performance level 100 or higher. Always check that life jackets are in good condition before use.
ISO 12402: INTERNATIONAL STANDARD FOR PERSONAL FLOTATION DEVICES (LIFEJACKETS AND BUOYANCY AIDS) The ISO 12402 series for personal flotation devices (lifejackets and buoyancy aids) was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 188, Small craft, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
ISO 12402 consists of the following parts, under the general title Personal Flotation Devices (PFDs): - Part 2: Lifejackets, performance level 275 — Safety requirements
- Part 3: Lifejackets, performance level 150 — Safety requirements
- Part 4: Lifejackets, performance level 100 — Safety requirements
- Part 5: Buoyancy aids (level 50) — Safety requirements
- Part 6: Special purpose lifejackets and buoyancy aids — Safety requirements and additional test methods
- Part 7: Materials and components — Safety requirements and test methods
- Part 8: Accessories — Safety requirements and test methods
- Part 9: Test methods
The International Organization for Standardization (ISO) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
|
SOLAS inflatable lifejacket
auto inflatable life jacket
#life preserver jacket
IMPA330140 | LIFE JACKET INFLATABLE F/ADULT, W/LIGHT&WHISTLE UKDOT APPROVED |
| 330140 | LIFE JACKET INFLATABLE F/ADULT
W/LIGHT&WHISTLE UKDOT APPROVED | 膨胀式救生衣带哨(充气式) |
| 330142 | LIFE JACKET INFLATABLE F/ADULT
W/LIGHT&WHISTLE USCG APPROVED | 膨胀式救生衣带哨（充气式） |
330166 LIFE JACKETS INFLATABLE MED/SOLAS APPROVED
|
330140
|
INFLATABLE LIFE
JACKET
|
|
330140
|
INFLATABLE
LIFE JACKETS (WORKING WEST)
|
#inflatable lifejacket 275n
INFLATABLE LIFE JACKETS 33 01 40
33-01-40 INFLATABLE LIFE JACKETS
330166 MED APPROVED / LIFE JACKET INFLATABLE F/ADULT, W/LIGHT & WHISTLE
Berth Life Jacket
充气式救生衣 Inflatable life jackets
330140 INFLATABLE LIFE JACKET FOR RIGGING PILOT COMBINATION LADDER & GANGWAY
Lifejacket - VIKING YouSafe™ Pro Red/Black 180N with Halkey Roberts® automatic release and plastic closure
330140 INFLATABLE LIFE JACKET FOR RIGGING PILOT COMBINATION LADDER & GANGWAY
Inflatable Life jacket SOLAS/MED approved 275 N Buoyancy
Inflatable Life jackets With Dual buoyancy Chamber (as
per LSA Code 2.2.2) Buoyancy Capacity -275 KN / Supply Dual chamber / Buoyancy
Capacity -275
KN
LSA-Code International Life-saving appliance Code (MSC.48(66))
2.2.2 Inflatable lifejackets
A lifejacket which depends on inflation for buoyancy shall have not less than two separate compartments and comply with the requirements of paragraph 2.2.1 and shall:
- inflate automatically on immersion, be provided with a device to permit inflation by a single manual motion and be capable of being inflated by mouth;
- in the event of loss of buoyancy in any one compartment be capable of complying with the requirements of paragraphs 2.2.1.2, 2.2.1.3 and 2.2.1.4; and
- comply with the requirements of paragraph 2.2.1.7 after inflation by means of the automatic mechanism.
MPA guidelines for safe transfer of persons between vessels at anchorages recommends the use of a working SOLAS type life jacket or a lifejacket meeting ISO 12402 Personal Floatation Devices performance level 100 or higher.
