These regulators are a single stage design used for the Calgaz 34, Calgaz 34s, Calgaz 58, Calgaz 105s and Calgaz 552s cylinders.
The 700 series regulators are preset to deliver gas at a flow rate specified by the user and may be divided into three groups.
The 713 has a maximum inlet pressure of 500 psig/35 bar and an inlet fitting to match the CGA 600 in the Calgaz 34s cylinders.
The 715 has a maximum inlet pressure of 1000 psig/70 bar and fits the Calgaz 34, Calgaz 58 and Calgaz 105s cylinders.
The 718 has a maximum inlet pressure of 3000 psig/207 bar and can be used as an economical single stage regulator for use on the Calgaz 552s and refillable cylinders with CGA fittings.
500 psig/35 bar
1000 psig/70 bar
5/8 x 18
3000 psig/207 bar
Standard flow rates are 0.5LPM, 1.0LPM, and 1.5LPM; however, these regulators
may be ordered with a preset flow as low as 0.2LPM, or as high a 6.0LPM.
(4LPM is maximum for model 713).
Buna N (713 only)
Nickel plated brass
0.6 lb/0.28 kg
0.5 lb/0.24 kg
0.7 lb/.032 kg
All regulators are warranted for two years.
® registered trademarks of The DuPont Company.
* Gauge indicates cylinder pressure in both psig and bar.