HANSEN, SURVIAL SUIT/ IMMERSION SUIT, SeaEco+
- Product Code: SeaEco+
- Availability: Pre-Order
SeaEco+
SeaEco+ is a further development of our SeaEco immersion suit. The major difference is that this suit is certified for use without a lifejacket. Built-in buoyancy in the collar ensures proper a floating position and adequate freeboard. Vacuum packing saves space and extends the mandatory service interval, which in turn makes this suit excellent value.
Facts
Area of application Shipping Material Neoprene 5mm w/single knitted polyester backing Adjustments Adjustment strap on lower leg/ankle w/velcro Main zipper type Polyurethane/plastic spiral, open Colour Orange Reflective material IMO Solas Hood Integral, in suit material Gloves 3-finger neoprene (detachable) Lifting becket/loop Yes, with D-ring and carbine hook in stainless steel Buddy line Yes, with floating carbine hook Whistle Yes, easy accessible in zipper slider Emergency light IMO Solas, water activated Boots / socks Neoprene socks with FR heavy duty rubber sole Wrist seals Neoprene with velcro adjustment Compatibility May be used without lifejacket Thermal protection with lining/inherent insulation 6 hours (IMO/Solas less than 2°C watertemp) Service interval (standard) 3 year Service Interval (in HP-vacuum) 5 years - manufacturer's recommendation Service interval (HP-vacuum) Note: Some flag states may have specific regulations with regards to service Other certifications RMRS
Transport Canada Certifications SOLAS-suit (w/integral buoyancy) Recognised by Transport Canada
Solas MED/1.6b (with inherent insulation - to be worn without lifejacket) Type of suit Evacuation/emergency suit
Survival/immersion suit
Transport Canada
Solas MED/1.6b (with inherent insulation - to be worn without lifejacket)
Survival/immersion suit
An immersion suit is a body covering suit that is worn specifically for the purpose of remaining afloat and surviving during emergencies in high seas. This suit is therefore also known as a survival suit or a rescue suit
Immersion Suit, also names survival suit, is a special waterproof dry suit that protects the wearer from hypothermia in cold water, after abandoning a sinking ship, especially in the ocean. Immersion suit is an important life-saving equipment at the open sea. It can significantly improve survival time in cold water.
Carriage Requirements
- SOLAS Chap.III/7.3;
An immersions suit or anti-exposure suit of an appropriate size shall be provided for every person assigned to crew the rescue boat or assigned to the marine evacuation system party.
- SOLAS Chap.III/32.3
- The paragraph applies to all cargo ships.
- An immersion suit of an appropriate size shall be provided for every person on board the ship. However, for ships other than bulk carriers, as defined in Chap.IX/1, these immersion suits need not be required if the ship in constantly engaged on voyages in warm climates where, in the opinion of the Administration, immersion suits are unnecessary.
- If a ship has any watch or work stations which are located remotely from the place or places where immersion suits are normally stowed, including remotely located survival craft carried in accordance with Chap.III/31.1.4 additional immersion suits of an appropriate size shall be provided at these locations for the number of persons normally on watch or working at those locations at any time.
(supplement) At least two sets of immersion suits are to be provided for the stored position of the additional liferaft required by Chap.III/31.1.4 (IACS UI SC213 Rev.4). - Immersion suits shall be so placed as to be readily accessible and their position shall be plainly indicated.
- The immersion suits required by this regulation may be used to comply with the requirements of Chap.III/7.3.
PERIODIC TESTING OF IMMERSION SUIT AND ANTI-EXPOSURE SUIT SEAMS AND CLOSURES (MSC/Circ.1114)
Research performed by several maritime Administrations has demonstrated that the seams and closures of immersion suits and anti-exposure suits experience deterioration over time.The rate and severity of deterioration may vary widely, depending upon the specific components and procedures employed in the manufacture of the suit and the conditions under which the suit is stored.However, even under ideal conditions, the materials and adhesives used have a finite service life and will inevitably experience a reduction in strength and/or loss of watertightness with age.
2.Monthly inspection of immersion suits and anti-exposure suits carried out in accordance with SOLAS regulation III/20.7 (see Shipping Circular MC No. 16 of 2002 dated 4 September 2002) may not be adequate to detect deterioration of seams and closures of the suits due to adhesive ageing and do not adequately address deterioration of seams and closures (zippers, etc.) which may not be readily apparent by visual inspection. Such deterioration can be detected by pressurization of the suit with air, and testing of the seams and closures for leaks with a soapy water solution.
3.To ensure the maintenance of adequate strength and watertightness of seams and closures of immersion suits and anti-exposure suits with age, each suit should be subjected to an air pressure test at intervals not exceeding three years, or more frequently for suits over ten years of age in accordance with the guidelines set out in IMO Circular MSC/Circ.1114 dated 25 May 2004 as part of the maintenance required to be carried out by SOLAS Reg III/20.3.1. A copy of the circular can be found in our website under "Circulars & Notices > Shipping Notices" at:http://www.mpa.gov.sg/web/wcm/myconnect/www/b36f16e4-4b43-4a85-8ddd-0b25d7146aed/circ1114.pdf?MOD=AJPERES
4.Notwithstanding that paragraph 4 of MSC/Circ.1114 recommends that the air pressure test be performed at a suitable shore-based facility, periodic testing of immersion suits and anti-exposure suits may be carried out by shipboard personnel who are deemed to have the necessary skills, knowledge and competence to carry out the test in accordance with MSC/Circ.1114 and with instructions provided by the manufacturer and that there are available on board suitable equipment necessary to carry out the test.
5.The "Company" as defined in paragraph 1.1.2 of the ISM Code may assess and decide on the shipboard personnel deemed to have the necessary skills, knowledge and competence to carry out the test in accordance with MSC/Circ.1114.
330169-IMMERSION SUITS UK DOT, APPROVED
Made of foam rubber. Serves to prevent the loss of body heat when submerged in cold water. Shall be provided for every person assigned to the crew of the rescue boat and at least three immersion suits shall be provided for each open type lifeboat on the ship.IMPA 330174
Immersion suits IMPA code: 330169
330168S IMMERSION SUITS, SOLAR NO.2 浸水保温服，2型 330169 IMMERSION SUITS, SOLAR APPROVED 浸水保温服， 330170 IMMERSION SUITS HK APPROVED 浸水保温服，HK，1型 IMMERSION SUITS UK DOT APPROVED - IMPA 330169
330171 APPROVED IMMERSION SUITS
330195
IMMERSION SUIT MED APPROVED IMMERSION SUIT MED APPROVED
