• HUGHES, STD-40K 45G/W WITH A FRAME Portable Safety Shower and Eye/Face Wash, 114 Litres

HUGHES, STD-40K 45G/W WITH A FRAME Portable Safety Shower and Eye/Face Wash, 114 Litres

  • Product Code: PORTABLE INTERIM SAFETY SHOWER & EYEWASH
  • Product SKU:
  • Item Code: EWSH-SPS-ZZZ -
  • Availability: In Stock

PORTABLE INTERIM SAFETY SHOWER & EYEWASH

Specifications

ItemPortable Safety Shower and Eye/Face Wash
Bowl StyleCovered
Capacity30.12 gal.
ColorWhite, Green
CoverageEyes And Face
CoversPlastic
Dia.21"
Eyewash ActivationPull Knob
Eyewash Bowl MaterialAcrylic Capped ABS
Flow Rate10.57 GPM
Head Dia.2 1/4" x 2"
Height88.609"
Installation TypePortable
Max. Flow Rate20 GPM
Media TypeWater Preservative
Min. Flow Rate3 GPM
Min. Operating Temp.32°F
Pressure PortPCL Connector
Shower ActivationPush Down Lever
Tank Capacity30 gal.
Tank MaterialPolypropylene Lined Carbon Steel
Weight Empty253.5 lbs.
Weight Full507 lbs.

Product Details

Shipping Information

Height (cm)124.97
Length (cm)154.94
Width (cm)80.01
HS Code7324900000
Weight (kg)263.2500

Features

  • This self-contained emergency shower has a capacity of 114 litres and provides a constant flow of water over 1-1/2 minutes for full decontamination.
  • It has a compact design that allows easy storage and features large tires with adjustable spacing to fit through different door openings. The large & rugged tires ensure easy manoeuvring by one person from one location to another.
  • It can also fit into an A-frame with a towing hitch for long routes or difficult terrain.

Standards and Approvals

  • CE
  • ISO
  • ANSI / ISEA



portable safety shower




H-STD40K45G - MOBILE INTERIM 114L SELF-CONTAINED SAFETY SHOWER AND EYEWASH


An essential addition to sites where a stationary safety shower and eye wash is unsuitable, for stand-by use
in locations where no water supply is available, or when existing safety showers are undergoing maintenance.

Designed to supplement permanent plumbed-in models, the 114 litre unit is easy to manoeuvre as the location
of the hazard changes during a project. This unheated model incorporates a polypropylene lined cylinder, heavy duty
powder coated stainless steel frame and large pneumatic tyres to aid mobility.

Options:

  •  Insulated jacket for frost protection (H-STD40K45G)
  •  Heated jacket to prevent water within the tank freezing (H-STD40K45G)
  •  Handheld eye, face and body shower


The 114 litre carbon steel cylinder is polypropylene lined to avoid internal corrosion. Painted with acid resistant pain and fitted with ' Emergency Shower' signs. The units is easily filled by connecting to a mains water supply via a 15 or 20 mm hose pipe and pressurised via a standard Schrader valve. It is moved using the attached stainless steel trolley with pneumactic wheels. This Mobile Emergency Safety Shower is designed as a quick response, first-aid device for use where a plumbed-in unit is not available and must therefore be backed up a method of further decontamination.

The 114 litre carbon steel cylinder is polypropylene lined to avoid internal corrosion. Painted with acid resistant pain and fitted with ' Emergency Shower' signs. The units is easily filled by connecting to a mains water supply via a 15 or 20 mm hose pipe and pressurised via a standard Schrader valve. It is moved using the attached stainless steel trolley with pneumactic wheels. This Mobile Emergency Safety Shower is designed as a quick response, first-aid device for use where a plumbed-in unit is not available and must therefore be backed up a method of further decontamination.

STD-40K/45G: Mobile self-contained emergency safety shower with eye/face wash

This mobile self-contained emergency safety shower with eye/face wash incorporates a polypropylene lined cylinder, a stainless-steel frame and large pneumatic tyres, making it easy to manoeuvre by one person.

  • 114 litre capacity providing a constant flow of water for over 1½ minutes
  • Covered eye/face wash protects the bowl and diffusers against dust and debris
  • Optional hand-held eye, face and body shower
  • Option to add an insulated (STD-J-40K/45G) or heated jacket (STD-H-40K/45G) for frost protection
  • Additional Information



  • Location: Indoor, Outdoor
  • Climate: Variable
  • Installation: Mobile
  • Features: Eye/Face Wash
  • Pipework: Stainless Steel
  • Capacity (Litres): 114


Emergency showers and eyewashes are required by the ANSI/ISEA Z358.1‐2014 standard to be

activated weekly, with a more thorough evaluation on an annual basis. With OSHA fine

increases of 80 percent having taken effect in August 2016, violations for inappropriate or

inadequate eyewash and shower equipment have resulted in penalties of more than $100,000.

The standard guides the placement, functionality, and maintenance requirements for

emergency showers and eyewashes. ANSI/ISEA Z358.1, in its current form, is the clearest and

most useful tool for protecting workers from eye, face, and bodily injuries resulting from caustic

and corrosive materials introduced by workplace incidents such as spills, splashes, and blown

particulates.

The standard requires stringent testing to be conducted on a regular basis to ensure properly

functioning equipment is being provided at all times if an incident were to occur. We should all

understand that compliance is not a once‐a‐year or once‐a‐month responsibility. Compliance is

an all‐day, every‐day requirement. Accordingly, emergency showers and eyewashes are

required by the ANSI/ISEA Z358.1‐2014 standard to be activated weekly, with a more thorough

evaluation on an annual basis. This requirement is established in Sections including 4.6.2, 4.6.5.

In practice, emergency response equipment such as eyewashes and showers sometimes fall to

the wayside when it comes to maintenance, especially when prioritized against emergency

preparedness equipment such as eye protection and fall protection. You should know that OSHA

does not prioritize or take a backseat when it comes to providing adequate and properly

functioning equipment, regardless whether the equipment aids pre‐ or post‐incident.

ANSI Weekly Minimum Performance Requirements

The standard itself has three minimum requirements for weekly inspections:

1. Emergency equipment shall be activated weekly. (Each piece of equipment is required to

be activated.)

2. Activation shall ensure flow of water to the head(s) of the device. (This would be both the

eyewash or eye/face wash head, as well as the showerhead.)

3. Duration of the activation shall be sufficient to ensure all stagnant water is flushed from

the unit itself and all sections of piping that do not form part of a constant circulation

system, also known as "dead leg" portions. (The duration is determined by the length of

piping where stagnant water could be sitting before it reaches the head(s) of the unit.)

In addition to the above weekly minimum performance checklist required by ANSI/ISEA, it

is recommended as a best practice to conduct additional weekly functional checks. The purpose

of these additional checks is to fully ensure the equipment is operating correctly and is capable

of providing proper first aid in the event of an emergency.

ACCESS

 Path of travel to the safety station shall be free of obstructions. (This could include hoses,

boxes, and doors.) (Sections 4.5.2, 5.4.2, 6.4.2, 7.4.2)

SHOWER

 Shower must deliver a minimum of 20 gallons (75.7 L) per minute. (Sec. 4.1.2, 4.1.4, 7.1)

 The valve shall go from “off” to “on” in one second or less and flushing fluid shall remain

on without the use of operator’s hands. (Sec. 4.2, 7.1)

EYEWASH/EYE/FACE WASH

 Outlets shall be protected from airborne contaminants. (Dust covers must be in place.)

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Tags: EWSH-SPS-ZZZ -