I/C CODE	ITEM	Part Number
ZMIS-IBU-ZZZ	IBUKI  TSL-40W LED Signal Light  Voltage:  AC100 - 110V Spec.  Maker Standard Please advise shipyard and hull no. and confirm the attached drawing no. EAA-5752  upon order.	TSL-40W

I/C Code	ITEM	Part
		Number
ZMIS-IBU-ZZZ	IBUKI, Nautilight, TSL-40W LED Signal light	TSL-40W

I/C CODE	ITEM	Part Number
ZMIS-IBU-ZZZ	IBUKI  TSL-40W LED Signal Light,   (EAA-5752) Voltage: ______ (Please advise voltage required upon order) Spec.  Maker Standard	TSL-40W
ZMIS-IBU-ZZZ	IBUKI  TSL-40W LED Signal Light,   (EAA-5752R1) Voltage: _______(Please advise voltage required upon order) Spec.  Maker Standard	TSL-40W

I/C CODE	ITEM	Part Number
ZMIS-IBU-ZZZ	IBUKI  TSL-40W LED Signal Light,   (EAA-5752) Voltage: ______ (Please advise voltage required upon order) Spec.  Maker Standard Please advise shipyard, hull no. and confirm the attached drawing no.  EAA-5752  with company stamp and signature upon order.	TSL-40W
ZMIS-IBU-ZZZ	IBUKI  TSL-40W LED Signal Light,   (EAA-5752R1) Voltage: _______(Please advise voltage required upon order) Spec.  Maker Standard Please advise shipyard, hull no. and confirm the attached drawing no. EAA-5752R1 upon order.	TSL-40W

I/C CODE	ITEM	Part Number
ZMIS-IBU-ZZZ	IBUKI  TSL-40W LED Signal Light (EAA-5752) 3-color type (red, white, green) Voltage:   AC110 - 115V - (requested by customer) Current:   50mA Spec.  Maker Standard	TSL-40W

I/C CODE	ITEM	Part Number
ZMIS-IBU-ZZZ	IBUKI  TSL-40W LED Signal Light   (EAA-5752) 3-color type (red, white, green) Voltage:   AC220V - (requested by customer) Current:    30mA     -(requested by customer) Spec.  Maker Standard HK Certificate is not included.  If required,  additional cost.	TSL-40W

LED SIGNAL LIGHT SYSTEM

Nautical equipment

The NAUTILIGHT LED signal light system is a signal light used when navigating canals, straits, and waterways around the world, such as the Suez Canal. Not only does the LED eliminate the need to replace light bulbs, but by combining it with a dedicated controller, the light color of one signal light can be switched between three colors: white, red, and green. This allows the installation of up to six signal lights to support all types of signals.
Since the controller and signal lights are connected by a communication signal, a single electric wire can be connected to each light in a daisy chain, significantly reducing the number of wires and wiring length. In addition, there is no need to change the design depending on the type of ship, making it possible to standardize the system.

■ Maintenance-free with LED lights
■ Reduction in the number of lights possible with the light color switching function
■ Reduction in the number of wires and wiring length possible with communication signal connection
■ Standardization of design possible
■ Memory function allows the lighting pattern to be stored (3 patterns)
■ Compliant with IEC60945