530611 EYE WASH WALL MOUNTING TYPE

IMPA Code:

530611

UOM:

SET

MTML UOM:

SET

Designed for washing off accidentally splashed acid or chemicals over human’s body by clean water. 

H-D5020 - WALL MOUNTED EYE/FACE WASH (STAINLESS STEEL 304)

Made in UK

Approved by International Standards & Regulations

Open stainless steel bowl, wall-mounted emergency eye/face wash featuring twin spray nozzles protected by dust covers which lift off upon activation via the push plate.
The inbuilt flow regulator valve guarantees an optimum water flow. Comes with PP sign.

The eye wash diffusers are fitted with fine mesh strainers designed to give a gentle flow of aerated water at 12 litres per minute as per the ANSI standard.
This unit is intended for indoor use but can be located outdoors where there is no risk of overheating.

OPTIONAL EXTRA ATTACHMENT:

H-DA003 : GRP RED FOOT CONTROL PANEL ASSEMBLY FOR EYE/FACEWASH

H-TFC-G – G RANGE FOOT TREADLE FOR INDOOR PREMIUM EYEWASH

Add to Enquiry

H-KTFC – K RANGE FOOT TREADLE FOR SELF-DRAINING EYEWASH

Add to Enquiry

FLANGES

Select options

H-VL60001 – 1/2″ BSP FEMALE SS316 SCALD PROTECTION VALVE – FULLY OPEN AT 38 DEG C FULLY CLOSED AT 32 DEG C

Add to Enquiry

H-VL60013 – 1/2″ BSP FEMALE SS316 SCALD PROTECTION VALVE – FULLY OPEN AT 35 DEG C FULLY CLOSED AT 29 DEG C

Add to Enquiry

REMOTE SWITCHES

Select options

SHOWER TEST KIT

Add to Enquiry

SHOWER MODESTY CURTAIN

Add to Enquiry

H-D5020 - WALL MOUNTED STAINLESS STEEL 304 EYE/FACE WASH

HUGHES, INDOOR EYE FACE WASH STAINLESS STEEL

eyewash with stainless steel bowl

STAINLESS STEEL EYEWASH

STAINLESS STEEL EYEWASHER

Open stainless steel bowl, wall-mounted emergency eye/face wash featuring twin spray nozzles protected by dust covers which lift off upon activation via the push plate.

The flow regulator valve guarantees an optimum water flow.

The eye wash diffusers are fitted with fine mesh strainers designed to give a gentle flow of aerated water at 12 litres per minute as per the ANSI standard.

This unit is intended for indoor use but can be located outdoors where there is no risk of overheating or freezing.

Pedestal mounting options also available.

Emergency showers and eyewashes are required by the ANSI/ISEA Z358.1‐2014 standard to be

activated weekly, with a more thorough evaluation on an annual basis. With OSHA fine

increases of 80 percent having taken effect in August 2016, violations for inappropriate or

inadequate eyewash and shower equipment have resulted in penalties of more than $100,000.

The standard guides the placement, functionality, and maintenance requirements for

emergency showers and eyewashes. ANSI/ISEA Z358.1, in its current form, is the clearest and

most useful tool for protecting workers from eye, face, and bodily injuries resulting from caustic

and corrosive materials introduced by workplace incidents such as spills, splashes, and blown

particulates.

The standard requires stringent testing to be conducted on a regular basis to ensure properly

functioning equipment is being provided at all times if an incident were to occur. We should all

understand that compliance is not a once‐a‐year or once‐a‐month responsibility. Compliance is

an all‐day, every‐day requirement. Accordingly, emergency showers and eyewashes are

required by the ANSI/ISEA Z358.1‐2014 standard to be activated weekly, with a more thorough

evaluation on an annual basis. This requirement is established in Sections including 4.6.2, 4.6.5.

In practice, emergency response equipment such as eyewashes and showers sometimes fall to

the wayside when it comes to maintenance, especially when prioritized against emergency

preparedness equipment such as eye protection and fall protection. You should know that OSHA

does not prioritize or take a backseat when it comes to providing adequate and properly

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating     Bad           Good

Captcha

Enter the code in the box below

Continue