Jiaxing Rongsheng Lifesaving Equipment Co., Ltd.

RS, IMMERSION SUIT, SIZE: XL (JUMBO), EC-MED APPROVED

C/W: WHISTLE, STAINLESS STEEL HARNESS & CARRYING BAG

MATERIAL: NEOPRENE

Name: Neoprene Immersion Suit solas approval

Model: RSF-II

• Material: NEOPRENE (5mm thickness)
• Pillow: Designed with a buoyancy pillow, No need for extra lifejacket.
• Reflective tape: SOLAS reflective tape,5cm x 10cm
• Zipper:  67cm length water tight zipper with plastic puller.
• Gloves: 3 finger Neoprene gloves
• Belt: black webbing belt with steel D-ring.
• Boots: Neoprene Material with Rubber sole
• Cold Water Neoprene Immersion Suit Accessories: water-proof Light, whistle.
• Weight: 5.0kg
• Buoyancy: >142N

RONGSHENG, IMMERSION SUIT, EC-MED APPROVED

            C/W: WHISTLE, STAINLESS STEEL HARNESS & CARRYING BAG

            MATERIAL: NEOPRENE (RED)

            ** CAN BE USED WITHOUT LIFEJACKET

            SIZE: M (MEDIUM) Height: 165 to 180cm / Chest: 100 – 110cm  

            SIZE:  L (UNIVERSAL) Height: Up to 195cm / Chest: 110 – 120cm  

            SIZE: XL (JUMBO) Height: 195 to 205cm / Chest: 120 – 132cm  

Immersion Suit, also names survival suit, is a special waterproof dry suit that protects the wearer from hypothermia in cold water, after abandoning a sinking ship, especially in the ocean. Immersion suit is an important life-saving equipment at the open sea. It can significantly improve survival time in cold water.

An immersion suit is a body covering suit that is worn specifically for the purpose of remaining afloat and surviving during emergencies in high seas. This suit is therefore also known as a survival suit or a rescue suit

Immersion Suit, also names survival suit, is a special waterproof dry suit that protects the wearer from hypothermia in cold water, after abandoning a sinking ship, especially in the ocean. Immersion suit is an important life-saving equipment at the open sea. It can significantly improve survival time in cold water.

Carriage Requirements

PERIODIC TESTING OF IMMERSION SUIT AND ANTI-EXPOSURE SUIT SEAMS AND CLOSURES (MSC/Circ.1114)

• Research performed by several maritime Administrations has demonstrated that the seams and closures of immersion suits and anti-exposure suits experience deterioration over time. The rate and severity of deterioration may vary widely, depending upon the specific components and procedures employed in the manufacture of the suit and the conditions under which the suit is stored. However, even under ideal conditions, the materials and adhesives used have a finite service life and will inevitably experience a reduction in strength and/or loss of watertightness with age.

  2.Monthly inspection of immersion suits and anti-exposure suits carried out in accordance with SOLAS regulation III/20.7 (see Shipping Circular MC No. 16 of 2002 dated 4 September 2002) may not be adequate to detect deterioration of seams and closures of the suits due to adhesive ageing and do not adequately address deterioration of seams and closures (zippers, etc.) which may not be readily apparent by visual inspection. Such deterioration can be detected by pressurization of the suit with air, and testing of the seams and closures for leaks with a soapy water solution.

  3.To ensure the maintenance of adequate strength and watertightness of seams and closures of immersion suits and anti-exposure suits with age, each suit should be subjected to an air pressure test at intervals not exceeding three years, or more frequently for suits over ten years of age in accordance with the guidelines set out in IMO Circular MSC/Circ.1114 dated 25 May 2004 as part of the maintenance required to be carried out by SOLAS Reg III/20.3.1. A copy of the circular can be found in our website under "Circulars & Notices > Shipping Notices" at:http://www.mpa.gov.sg/web/wcm/myconnect/www/b36f16e4-4b43-4a85-8ddd-0b25d7146aed/circ1114.pdf?MOD=AJPERES

  4.Notwithstanding that paragraph 4 of MSC/Circ.1114 recommends that the air pressure test be performed at a suitable shore-based facility, periodic testing of immersion suits and anti-exposure suits may be carried out by shipboard personnel who are deemed to have the necessary skills, knowledge and competence to carry out the test in accordance with MSC/Circ.1114 and with instructions provided by the manufacturer and that there are available on board suitable equipment necessary to carry out the test.

  5.The "Company" as defined in paragraph 1.1.2 of the ISM Code may assess and decide on the shipboard personnel deemed to have the necessary skills, knowledge and competence to carry out the test in accordance with MSC/Circ.1114.

  
  

  330169-IMMERSION SUITS UK DOT, APPROVED

  Made of foam rubber. Serves to prevent the loss of body heat when submerged in cold water. Shall be provided for every person assigned to the crew of the rescue boat and at least three immersion suits shall be provided for each open type lifeboat on the ship.

  IMPA 330174

  Immersion suits IMPA code: 330169

  330168S	IMMERSION SUITS, SOLAR NO.2	浸水保温服，2型
  330169	IMMERSION SUITS, SOLAR APPROVED	浸水保温服，
  330170	IMMERSION SUITS HK APPROVED	浸水保温服，HK，1型

  IMMERSION SUITS UK DOT APPROVED - IMPA 330169

  330171 APPROVED IMMERSION SUITS

  330195

  IMMERSION SUIT MED APPROVED IMMERSION SUIT MED APPROVED