• UVEX, PHEOS E-WR, LONG BRIM, NON-VENTED, SAFETY HELMET, YELLOW, 9770 134

UVEX, PHEOS E-WR, LONG BRIM, NON-VENTED, SAFETY HELMET, YELLOW, 9770 134

  • Product Code: 9770 134
  • Availability: In Stock

UVEX, PHEOS E-WR, LONG BRIM, NON-VENTED, SAFETY HELMET, YELLOW, 9770 134 

uvex climazone helmet ventilation

Keep a cool head at all times: The individually adjustable climazone ventilation ensures optimal ventilation. Three variable ventilation zones of the safety helmet can be opened or closed as you wish. The arrangement of the ventilation slots lets warm air escape, keeping a comfortable head climate in the safety helmet.

Innovative climate management from head to toe
The uvex climazone product system stands for climate management from head to toe. To do this, uvex has combined its expertise in research, material use and product development and is the only manufacturer of personal protective equipment to present a functioning climate concept, which is applied in an integrated approach across all product groups.

  • safety helmet with slots for uvex visors, earmuffs and lamps
  • side Euroslot adapters (30 mm) for attaching earmuffs
  • suitable for use by electricians as helmet shell is fully enclosed
  • meets standard EN 397 and additional requirements for very low temperatures (-30 °C) and molten metal (MM) splash and is approved in accordance with EN 50365 (1000 V AC)
  • conventional suspension harness for comfortable adjustable fit (uvex pheos E)
  • suspension harness with wheel ratchet for variable width adjustment (uvex pheos E-WR)
  • six-point textile band attachment ensures optimal fit and comfort
  • SETSCO / PSB approved 

DIN EN 397 – Protection from falling objects

Industrial safety helmets from uvex comply with standard DIN EN 397, which states that they must be designed to protect the wearer from falling objects. Protection against mechanical impacts to the head safeguards the user against possible consequences such as brain injuries or skull fractures. The standard also includes protection against lateral deformation of the helmet, as well as protecting the wearer from dangerous head injuries.

Industrial safety helmets that comply with standard DIN EN 397 generally meet the following safety requirements:

BINDING REQUIREMENTSOPTIONAL REQUIREMENTS
All helmets certified according to EN 397 must meet these requirements.A helmet certified in accordance with EN 397 may meet these requirements; they are, however, not mandatory requirements.
shock absorption, verticalvery low temperatures (-20 °C or -30 °C)
penetration resistance (against sharp and pointed objects)very high temperatures (+150 °C)
flame resistanceelectrical insulation (440 V)
chin strap attachment: chin strap releases at minimum 150N and maximum 250 Nmolten metal (MM)
lateral deformation

Model overview

EN 50365 – Insulating helmets for use on low voltage installations

Protection against electric shocks and prevention of dangerous electric current passing through the head – requirements:

  • All helmets must also meet the requirements in accordance with EN 397.
  • Protection against alternating voltage of up to 1000 V (AC) or direct voltage up to 1500 V (DC)
  • Insulating helmets must not contain any conductive parts.
  • Air vents (if available) must not allow any accidental contact with live parts.

EN 12492 – Helmets for mountaineers

Protection against hazards that may occur during activities undertaken by mountaineers – requirements:

  • Shock absorption, vertical, frontal, lateral, dorsal
  • Penetration resistance
  • Carrier element (chin strap releases at min. 500N)
  • Strength of carrier element: Chin strap may exhibit maximum elongation of 25mm
  • Carrier element effectiveness: Helmet must not slide from the head

31 01 22

SAFETY HELMET (GOOD QUAILTY)

331162HELMET SAFETY SLOTTED 高密度聚乙烯安全帽

Write a review

Note: HTML is not translated!
    Bad           Good