HAMMAR LIFEBUOY RELEASE SYSTEM Mk II - HM-0600

  • Product Code: LIFEBUOY RELEASE SYSTEM Mk II HM-0600
  • Item Code: ZMIS-OVS-ZZZ -
  • Availability: Pre-Order

HAMMAR, LIFEBUOY RELEASE SYSTEM Mk II  

HM-0600

Lifebuoy Release System Mk II

Description

  • Product Specification:Complete package for electric/water release
  • Backup Battery:No
  • Release Depth:1,5 - 4 m
  • Weight:18kg
Notes:

Included in the kit:
* One GRP holder with pre-installed metal holder.
* One ERU (electric remote unit) with cord pre-installed on the metal holder. Cable length 1,5m
* One Release Switch in a protective box to be mounted at the wheelhouse or bridge. Colour: silky grey. IP 66 class. If mounted outside it shall be protected by an outer protective enclosure. Maximum diameter for cable 12mm.
* One connector box in marine grade plastic, IP66 class. Colour: steel grey. Maximum diameter for cable 12mm.
* 20 meters of grey cable 2 x 0,75 mm2, diameter 8mm, other lengths available upon request.
* One manual safety pin in stainless steel
* One pilot line for loading the lifebuoy
* Installation manual, user guide and test of the Lifebuoy Release System document.

For measurements please ask for drawings.

Not supplied in the kit from Hammar:

Lifebuoy (any SOLAS lifebuoy will fit the GRP holder)
Mounting bolts and fittings for installation on board.

Rearming kit HM-0630

*GRP-Holder may be made available in Navy Grey upon request

Approvals


The Hammar Lifebuoy Release System consists of:

  • GRP holder with metal spring holder and manual backup
  • Hammar ERRS remote activation package

Features:

  • Safe and quick operation to save lives
  • Electric activation from the bridge
  • One complete package
  • Easy and quick installation onboard
  • Economical solution

Note:

  • The GRP holder is double-sided and can therefore be mounted on either starboard or port side.
  • Lifebuoy not supplied from CM Hammar.
  • MOB signal can be mounted. Please follow the mounting instructions from the MOB manufacturer.


HAMMAR Lifebuoy Release System Mk II Complete package for electric/water remote release, C/W:
• GRP holder with pre-installed metal holder and bracket.
• ERU (electric remote unit) with cord pre-installed on metal holder.
• Release Switch
• Connector box
• 20m cable from connector box to release switch, screened 2 x 0,75mm
2, diameter 8mm
• Manual safety pin
• Pilot line for loading the lifebuoy
• Installation manual
• User Guide
• Marking instruction
NOTE : LIFEBUOY & MOUNTING BOLTS NOT INCLUDED

MPN: HM-0600

Other HAMMAR part numbers:

CMH PART NUMBER           SPECIFICATION                                                                                                                
HC-0200
H20/MRU REMOTE Dual Assembly (YELLOW - GREEN) RFD MES type, EC
HC-0207
H20/MRU REMOTE Dual Assembly (YELLOW - GREEN) DSB type, MCA/EC
HC-0208
H20/MRU REMOTE Dual Assembly (YELLOW - GREEN) Heavy Load Type
HC-0213
H20/MRU REMOTE Dual Assembly (YELLOW-YELLOW-GREEN) Hammar H
HC-0214
H20/MRU REMOTE Dual Assembly (YELLOW - GREEN) Hammar H20 type
HC-0215
H20 Dual Assembly (YELLOW) FDB type, EC approved
HC-0219
H20/MRU REMOTE Dual Assembly (GREEN-YELLOW-GREEN) Hammar typ
HC-0220
H20/MRU REMOTE Dual Assembly (GREEN - GREEN) One rope sling of   57
HC-0225
H20/MRU REMOTE Dual Assembly(YELLOW - GREEN) Double rope sling   R